tooth root
美 
英
例句
Therefore, the calculated tooth root stress of the unified expression principally differs from the one of the original standard.
因此，计算出齿根应力的统一表达主要的不同之处之一，原来的标准。
In view of this it not surprisingly that the basis of almost all tooth root stress calculations is very close to this type of modelling.
鉴于这一点，这并不奇怪的基础上几乎所有的齿根应力的计算是非常接近这种类型的模型。
Objective: To evaluate whether the renal capsule is a suitable implanting place for tissue engineering of tooth root and periodontal tissue.
前言：目的：评价肾被膜作为组织工程牙根和牙周组织的种植环境。
During the orthodontic processing, the resorption of tooth root and pathologic changes of pulp always happened.
在矫正治疗过程中，常常会发生牙根的吸收及牙髓的病变。
Human tooth development is a consecutive process, which includes bud stage, cap stage, bell stage and tooth root development.
人类牙齿发育是一个连续的过程，经历了蕾状期、帽状期、钟状期和牙根发育期。
Objective: To evaluate the capability of the apical tissue of rat molar to grow tooth root and periodontal tissue.
目的：探讨大鼠磨牙牙根根端组织发育牙根和牙周组织的能力。
The branch of dentistry that deals with diseases of the tooth root, dental pulp, and surrounding tissue.
牙髓病学研究牙根、牙髓及其周围组织疾病的牙医学的一个分支
Tooth coronal and tooth root boundary show one arc curve, call tooth neck, renown neck predestined relationship or neck line.
牙冠与牙根交界处呈一弧形曲线，称为牙颈，又名颈缘或颈线。
After withdrawal of traction force, tooth root and periodontal tissue were gradually repaired.
停止加力后，牙根及牙周组织逐渐修复。
Forming hob with exhibition can avoid a processing cutting tool from the tooth root department transition curve.
成形滚刀可避免用展成刀具加工时齿根部产生的过渡曲线。
Methods Tooth root Injected solidified calcium phosphate cataplasm tube, then pressed with gutta peneha points.
方法自固化磷酸钙充填糊剂根管内注入后加牙胶尖挤压。
Hypoplasia of teeth root (HTR) disease is a disorder with physiological development of tooth root.
牙根发育不良疾病是牙齿根部生理性发育出现障碍的疾病。
The results show that the highest temperature appears in tip tooth and the lowest temperature appears in tooth root.
结果表明，在成形过程中，齿模型腔齿顶处温度最高，齿根处温度最低。
And it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.
分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。
OD to 15 mm below tooth root , ie tooth zone . No indication exceeding that equal to 3 mm flat bottom hole at the defect beam path distance.
齿根下即齿区以下的外径为15毫米；在超声波发射程距的缺陷处，3毫米的平底孔没有显示出来。
OD to 15 mm below tooth root , ie tooth zone .
从外径最外侧到齿根下15毫米，即齿区。
A clinical evaluation of clindamycin loaded coral paste for filling the front tooth root canals
珊瑚克林霉素糊剂充填前牙根管的临床研究
Finite element analysis of the tooth root bending stress. Of an unsymmetric gear with double pressure angles
双压力角非对称齿廓齿轮齿根弯曲应力的有限元分析
by shallow groove, the tooth root stress concentration of the small shaft and hub to weaken the strength of less;
因槽较浅，齿根处应力集中较小，轴与毂的强度削弱较少；
Calculation of the bending fatigue strength at the tooth root of driving gears on reduction gear drives
减速齿轮传动中主动轮齿根弯曲疲劳的计算
a dental implant is an artificial tooth root that a periodontist places into your jaw to hold a replacement tooth or bridge
种植牙是一种通过专科医生植入颌骨的人工牙根，用以镶复牙冠或牙桥
Clinical Observation of Tooth Root Filled with Solidified Calium Phosphate
自固化磷酸钙根管充填剂根充的临床疗效观察
Methodological Study on Tooth Root Damping Character Measurement
齿根阻尼特性的测量方法
Effect of the Friction between Teeth on the Bending Stress at the Tooth Root of Helical Gear
齿间摩擦对斜齿轮齿根弯曲应力的影响
Study on Tooth root Stress, Tooth Deflection, Mesh Stiffness and Transverse Load Factors of Gears
齿轮齿根应力轮齿挠度啮合刚度和端面载荷系数的研究
Taking the Tooth Root Inserted in Maxillary Sinus by Inferior Nasal Meatus Puncture and Lavage
牙根误入上颌窦行下鼻道穿刺冲洗法取出
min hardness must be achieved in tooth root and fillet region
齿根和圆角处的硬度不得低于硬度下差
A calculation research on the tooth root bending stress of asymmetrical involute gear
非对称渐开线齿轮齿根弯曲应力的计算分析
calculation of load capacity of bevel gears - calculation of tooth root strength
伞齿轮负载能力的计算.齿根强度的计算
Effects of Root Canal Taper and Cyclic Fatigue on the Mechanical Characters of Tooth Root
根管锥度和循环疲劳对牙根力学性能的影响
Determining the Effect of Sliding Friction between Teeth on Tooth Root Bending Fatigue Stress by Diagrams
以图谱确定齿间摩擦对齿根弯曲疲劳应力的影响
Simplistic Calculating Method for Tooth-root Stress
齿根应力简化计算方法
Calculation of Gear Tooth Root Flexural Fatigue Strength under the Action of Friction
摩擦力作用下的齿轮齿根弯曲疲劳强度的计算
Determining the Effect of the Sliding Friction Between Teeth on the Bending Fatigue Stress on the Tooth Root by Use of Diagrams
利用图谱确定齿间摩擦对齿根弯曲疲劳应力的影响
Research on the Bending Stress in Tooth Root of Double Circular-arc Gear
双圆弧齿轮齿根弯曲应力的研究
Analysis of tooth root bending stress for spiral bevel gears
弧齿锥齿轮齿根弯曲应力分析
Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
伞齿轮负载能力的计算.第3部分：齿根强度的计算
Designing method of gear reliability based on contact strength of tooth surface and bending strength of tooth root
基于齿面接触强度和齿根弯曲强度的齿轮可靠性设计方法
Research on the Tooth Root Stress of ZY- 1 Model Hardened Tooth Surface Double-circular-arc Gear
ZY-1型硬齿面双圆弧齿轮齿根应力的分析
The Experience of Subfissure Tooth Root Canal Therapy with POLIN Ring Fixation
隐裂牙根管治疗前树脂带环固定的应用体会
